User manual

Chapter 3. Set-Up
3-15
RIP Version: This determines the
format and broadcasting method of
any RIP transmissions by the
gateway.
RIP v1: it only sends RIP v1
messages only.
RIP v2: it send RIP v2 messages in
multicast and broadcast format.
Authentication required.
None: for RIP, there is no need for
an authentication code.
Password: the RIP is protected by
password, authentication code.
MD5: The RIP will be decoded by
MD5 then protected by password,
authentication code.
Poison Reserve is for the purpose of
promptly broadcasting or multicasting
RIP when the route is changed. (ex
shutting down one of the routers in
routing table)
Enable: the gateway will actively
broadcast or multicast the routing
information.
Disable: the gateway will not
broadcast or multicast the information.
After modifying the RIP parameters, press finish.
The screen will prompt with the modified parameters. Check the parameters and press Restart to
restart the router or press Continue to setup other parameters.