User manual

76
14.13.2 Security
Security command can be configured sixteen legal IP address for telnet access and telnet port number.
Move the cursor “ >> “ to security and press enter. The default legal address is 0.0.0.0. It means that
there is no restriction of IP to access the router via telnet.
>> port Configure telent TCP port
ip_pool Legal address IP address pool
list
Show security profile
14.13.3 SNMP
Simple Network Management Protocol (SNMP) is the protocol not only governing network
management, but also the monitoring of network devices and their functions.
The router can generate SNMP traps to indicate alarm conditions, and it relies on SNMP community
strings to implement SNMP security. This router support MIB I & II.
Move the cursor “ >> “ to snmp and press enter.
>> community Configure community parameter
trap Configure trap host parameter
5 SNMP community entry can be configured in this system. Move the cursor to community and press
enter.
----------------------------------------------------------------------
Command: admin snmp community <1~5> <more...>
Message: Please input the following information.
Community entry number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow:
>> edit Edit community entry
list Show community configuration
5 SNMP trap entry can be configured in this system. Move the cursor to trap and press enter.
----------------------------------------------------------------------
Command: admin snmp trap <1~5> <more...>
Message: Please input the following information.
Trap host entry number <1~5> : 2