User manual

70
14.8 Status
You can view running system status of SHDSL.bis, WAN, route and interface via status command.
Move cursor “ >> “ to status and press enter.
>> shdsl.bis Show SHDSL.bis status
wan Show WAN interface status
route Show routing table
interface Show interface statistics status
firewall Show firewall status
Command Description
shdsl.bis The SHDSL.bis status includes line rate, SNR margin, TX power, attenuation
and CRC error of the product, and SNR margin, attenuation and CRC error of
remote side. The product access remote side information via EOC (embedded
operation channel).
wan WAN status shows the 8 PVC information which are configured.
route You can see the routing table via route command.
interface The statistic status of WAN and LAN interface can be monitor by interface
command.
firewall The current and history status of firewall are shown in this command.