User manual

61
12 LAN-to-LAN connection with bridge Mode
12.1 CO side
Click Bridge and CO Side to setup Bridging mode of the Router and then click Next.
Enter LAN Parameters
IP: 192.168.0.1
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
Host Name: SOHO
Enter WAN1 Parameters
VPI: 0
VCI: 32
Click LLC
Click Next
The screen will prompt the new configured
parameters. Check the parameters and
Click Restart The router will reboot with the
new setting.
PC
IP: 192.168.0.1
Netmask: 255.255.255.0
STU-C (CO)
STU-R (CPE)
Bridge
IP: 192.168.0.100
Netmask: 255.255.255.0
Gateway: 192.168.0.1
Bridge
IP: 192.168.0.2
Netmask: 255.255.255.0
VPI:0, VCI:32
Encapsulation: LLC
IP: 192.168.0.200
Netmask: 255.255.255.0
Gateway: 192.168.0.2