User manual

53
Set the policy to action.
Description: A brief statement describe this
policy
Local IP: type IP address of local host in
prioritized session.
Remote IP: type IP address of remote host
in prioritized session.
Local Port: type the service port number of
local host in prioritized session.
Remote Port: type the service port number
of remote host in prioritized session.
Protocol: identify the transportation layer
protocol type you want to prioritize, ex:
TCP or UDP. The default is ANY.
Precedence: type the session’s prioritized level you classify, 0 is lowest priority, 5 is highest priority.
This is an example for your reference,
192.168.1.60 is the highest priority to
undergo the over full bandwidth situation.
192.168.1.50 is the second high priority;
192.168.1.40 is the third high priority and
so on.