User manual

52
2 10.1.99.1 172.16.6.1 Permit (A)
3 10.1.1.1 172.16.6.1 Permit (A)
4 10.1.1.1 172.16.1.1 Deny (C)
5 192.168.3.4 172.16.6.1 Deny (C)
The rule order will permit 10.1.99.1 to access 172.16.6.1.
When the rule is ordered as BAC.
Index Source Address Destination Address Action
1 10.1.99.1 172.16.1.1 Deny (B)
2 10.1.99.1 172.16.6.1 Deny (B)
3 10.1.1.1 172.16.6.1 Permit (A)
4 10.1.1.1 172.16.1.1 Deny (C)
5 192.168.3.4 172.16.6.1 Deny (C)
The rule order will deny 10.1.99.1 to access 172.6.6.1.
8.9 IP QoS
IP QoS is a good function to decide which PCs can get the priorities to pass
though router once if the bandwidth is exhausted or fully saturated.
Click Enable at item Trigger IP QoS Sevice
in General IP QoS Parameter, which turn on
this function if you want to enable it.
Click Add in the bottom of web page to
begin a new entry in Policy table.