User manual

8.2 Bridge

If you want to setup advanced filter function while router is working in bridge

mode, you can use BRIDGE menu to setup the filter function, blocking function.

Click Bridge to setup.

Press Add in the bottom of web page to add

the static bridge information.

If you want to filter the

designated MAC

address of LAN PC to access Internet, press

Add to establish the filtering table. Put the

MAC address in MAC Address field and

select Filter in LAN field.

If you want to filter the

designated MAC

address of WAN PC to access LAN, press

Add to establish the filtering table. Key the

MAC address in MAC Address field and

select Filter in WAN field. For example: if

your VC is setup at WAN 1, select WAN 1

Filter.

The screen will prompt the parameters that

will be written in EPROM. Check the

parameters before writing in EPROM.

Press Restart to restart the router working

with new parameters or press Continue to

setup another parameter.