User manual

20
4 Getting To Know Your Router
This section will introduce hardware of the router.
4.1 Front Panel
The front panel contains LED which show status of the router.
LED status of 4-wire/4-port router
LEDs Active Description
PWR On Power on
On SHDSL.bis line connection is established
LNK
Blink SHDSL.bis handshake
WAN
ACT On Transmit or received data over SHDSL.bis link
On Ethernet cable is connected to LAN 1
1
Blink Transmit or received data over LAN 1
On Ethernet cable is connected to LAN 2
2
Blink Transmit or received data over LAN 2
On Ethernet cable is connected to LAN 3
3
Blink Transmit or received data over LAN 3
On Ethernet cable is connected to LAN 4
LAN
4
Blink Transmit or received data over LAN 4
On SHDSL.bis line connection is dropped
ALM
Blink SHDSL.bis self test
LED status of 2-wire/1-port router
LEDs Active Description
PWR On Power adaptor is connected to the router
On SHDSL.bis line connection is established
LNK
Blink SHDSL.bis handshake
WAN
ACT Blink Transmit or received data over SHDSL.bis link
On LAN port connect with 10M NIC
10M/ACT
Blink LAN port acts in 10M
On LAN port connect with 100M NIC
LAN
100M/ACT
Blink LAN port acts in 100M
On SHDSL.bis line connection is dropped
ALM
Blink SHDSL.bis self test