User manual
10
Security
¾ DMZ host/Multi-DMZ/Multi-NAT function
¾ Virtual server mapping (RFC1631)
¾ VPN pass-through for PPTP/L2TP/IPSec tunneling
¾ Natural NAT firewall
¾ Advanced Stateful packet inspection (SPI) firewall (Firewall Router)
¾ Application level gateway for URL and keyword blocking (Firewall Router)
¾ User access control: deny certain PCs access to Internet service (Firewall Router)
Management
¾ Easy-to-use web-based GUI for quick setup, configuration and management
¾ Menu-driven interface/Command-line interface (CLI) for local console and Telnet access
¾ Password protected management and access control list for administration
¾ SNMP management with SNMPv1/SNMPv2 (RFC1157/1901/1905) agent and MIB II
(RFC1213/1493)
¾ Software upgrade via web-browser/TFTP server
ATM
¾ Up to 8 PVCs
¾ OAM F5 AIS/RDI and loopback
¾ AAL5
ATM QoS
¾ UBR (Unspecified bit rate)
¾ CBR (Constant bit rate)
¾ VBR-rt (Variable bit rate real-time)
¾ VBR-nrt (Variable bit rate non-real-time)
AAL5 Encapsulation
¾ VC multiplexing and SNAP/LLC
¾ Ethernet over ATM (RFC 2684/1483)
¾ PPP over ATM (RFC 2364)
¾ Classical IP over ATM (RFC 1577)
PPP
¾ PPP over Ethernet for fixed and dynamic IP (RFC 2516)
¾ PPP over ATM for fixed and dynamic IP (RFC 2364)
¾ User authentication with PAP/CHAP/MS-CHAP
WAN Interface
¾ SHDSL.bis: ITU-T G.991.2 (2004) Annex A/B/F/G
¾ Encoding scheme: 16-TCPAM, 32-TCPAM,
¾ Data Rate: N x 64Kbps ,N=3~89, 0 for adaptive, 89 as default (2-wire mode)
¾ Impedance: 135 ohms
LAN Interface
¾ 4-ports switching hub (4-port router)
¾ 10/100 Base-T auto-sensing and auto-negotiation
¾ Auto-MDIX (4-port router)
Hardware Interface
¾ WAN: RJ-11
¾ LAN: RJ-45 x 4 (4-port router) or RJ-45 x 1 (1-port router)
¾ Console: RS232 female
¾ RST: Reset button for factory default
Indicators
¾ General: PWR
¾ WAN: LNK, ACT
¾ LAN: 10M/ACT, 100M/ACT (1-port router)