Product specifications

Chapter 3 Configuration and Operation
17
CLICommand Descriptions
ProvisioningCommands
gci
InitializeGCIMiddleWare&CESoPSNchip
InitializerelativeTasks,MessagesandSemaphores.
CAUTION:Thiswillclearalltheconfiguration.
cesopget GetcurrentCESoPSNSetting.
srcnetip_addrnet_maskgateway_ip
SetCESoPSNIPaddress,netmaskandgatewayIPaddress.
ip_addr:IPAddress,net_mask:netmask,gateway_ip:gatewayIP.
EX:srcnet192.169.1.28255.255.255.0192.169.1.254
lansetenablebandwidth
SetCESoPSNLANTrafficEnableandBandwidth.
enable:0:disable,1:enable.
bandwidth: 0~15 (0: 50K, 1:100K, 2:150K, 3:200K, 4:250K, 5:300K, 6:350K, 7:400K,
8:800K,9:1.6M,10:3.125M,11:6.25M,12:12.5M,13:25M,14:50M,15:100M)
EX:lanset115(usetherestofBWminusTDMtraffic)
vlansetenable SetVlanModeenable/disable
ceschsetch_noenabledest_ipdest_mac
SetCESoPSNChannelEnable,DestinationIPandMAC.
ch_no:E1channelnumber(1~4)
enable:0:disable,1:enable.
dest_ip:destinationnodeIPaddress.
dest_mac:destinationnodeMACaddress
Situation1:Setdest_ip,thengetdest_macfromfarend
EX:ceschset11192.168.1.28
Situation2:Setdest_ipanddest_macmanually
EX:ceschset11192.168.1.28AA:BB:CC:DD:EE:FF
cespwidsetch_noTrPWIDPrPWID
SetCESoPSNChannelTrPWIDandPrPWID.
ch_no:E1channelnumber(1~4)
TrPWID:TransmitPseudoWireID.
PrPWID:ProvisionPseudoWireID.
EX:cespwidset111
jitterbdch_nodepth
SetCESoPSNChannelJitterBufferDepth.InitialJitterDSis3.
ch_no:E1channelnumber(1~4)
depth: jitter buffer depth 0~7 (0:11ms, 1:23ms, 2:40ms, 3:75ms, 4:99ms, 5:145ms,
6:192ms,7:239ms)
EX:jitterbd12(Suggesteddefaultistoset40msforgeneraluplinklatency)
pktsizech_nopkt_size
SetCESoPSNChannelPacketSize
Pkt_size:0:1514Byte,1:782Byte,2:178Byte.3:306Byte.
cesfe1modech_noenable
cesfe1crcch_noenable
cesfe1tsmapch_noTsMap
ebersetch_noenablethreshold
SetCESoPSNEBEREnableandThreshold.
ch_no:E1channelnumber(1~4)
enable:0:disable,1:enable.
threshold:0~3(0:10^‐3,1:10^‐4,2:10^5,3:10^‐6)
ceschtgprisetch_no1st.source
2nd.source
SetCESoPSNChannelclockprioritysourceinTGmode
Source:1:E1.TG,2:HoldOver,3:FreeRun.
ceschvlanvlpidch_novlpid
SetCESoPSNChannelvlantag
vlp:0~7,id:0~0xFFF
eberget GetCESoPSNEBEREnableandThreshold.
AlarmCommand
almall Displayallalarmstatus(CESoPSN)
Table 3.1 CLI Command Descriptions