User manual

For example: PTZ down.
 Use Alarm Buffer: Select Use alarm buffer when you forward the image /
audio of before and after the alarm detection (pre-alarm, post-alarm). If you do
not select it, only the image of the moment of the alarm detection is forwarded.
Click Alarm buffer to display the Alarm buffer setting menu.
Note:
You can set the alarm buffer function at alarm buffer page. (Please go “Setting →
Advance → Alarm buffer → Setting”) For more details, you can check Chapter
6.5.
 Parameter: the parameter of CGI (defined in URL of HTTP→General)
is from your target device. For example, move=down.
 Message: message will show up in the form of Message = PTZ down.
If your target device didn’t support the parameter of message, you
can’t see the message. So you can just take the message as a note.
For example: PTZ down.