User manual

60
5.2.1 General
Select On when you use the SMTP function. The common setting options are
displayed below. Select Off, if you do not wish to use the e-Mail (SMTP) function.
Note :
The Setting of general part will be the same as the setting of IP Notification (Please
check “Setting → Basic → Network → IP Notification”)
 SMTP server name: Type the SMTP server name up to 64 characters, or the IP
address of the SMTP server.
 SMTP Server Port: You can set port number from 1~65535 according to your mail
server. The default value is 25.
 Security setting: Tick SSL box if the mail server you use has security
restriction.
Note:
If you use g-mail as your mail server, you should set 587 as your port number
and tick SSL box.
 Authentication: Select the authentication required when you send an email.
 Off: Select if no authentication is necessary when an email is sent.
 On: When authentication is necessary an e-mail is sent, select one of the
authentication methods from the followings.