User manual

5.1.1 General

Select “On” when you use FTP function. The FTP client setting page appears.

Select “Off”, when you do not wish to use the FTP client function.

Note:

The frame rate and operability on the main viewer may decrease while a file is

being transmitted by the FTP client function.

 FTP server name: Type the FTP server name to upload still images up to 64

characters, or the IP address of the FTP server.

 User name: Type the user name for the FTP server.

 Password: Type the password for the FTP server.

 Retype password: To confirm the password, type the same characters as you

typed in the Password box.

 Passive mode: Set whether you use the passive mode of FTP server or not when

connecting to FTP server. Select On to connect to FTP server using the passive

mode.

 Attached file type: You can choose the attached file in JPEG or MPEG4 type.