User manual

35
 Use the following DNS server address: Select this when you set the fixed
address as the IP address of DNS server.
 Primary DNS server: Enter the IP address of the primary DNS server.
 Secondary DNS server: Enter the IP address of the secondary DNS server.
Note :
1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol
for encapsulating Point-to-Point Protocol frames insider Ethernet frames.
PPPoE connection is used mainly with ADSL service where individual users
connect to the ADSL transceiver (modem) over Ethernet work. It also widely
used in XDSL (digital affiliate line such as ADSL, VDSL or SDSL)
2. The IP Camera needs to be rebooted after it finishes changing the
network completely.
3. The IP Camera with Intelligent IP Installer can’t be founded after
turning on the PPPoE and reboot.