User manual

33
4.3.2 PPPoE (Point-to-Point Protocol over
Ethernet)
If your ISP provides Dynamic IP with authentication by username and password,
type all PPPoE information in this part. When you use the PPPoE function, you need
to turn on the DDNS or IP Notification function at same time.
 IP address: The IP address obtained at the PPPoE connecting with network.
 User ID: Enter the user ID for authentication necessary for PPPoE connections.
Type it up to 64 characters.
 Password: Enter the password for authentication necessary for PPPoE
connections. Type it up to 32 characters.
 Re-type password: Re-type the password to confirm.
 Obtain DNS server address automatically: Select this to obtain the address of
DNS server automatically.