User manual

CHAPTER 4 How to Use
4.3.4 Security
4.3.4.1 Accounts
The device default account and password setting is “admin/admin”. That means anyone
might gain access the device, including the configuration, as long as the IP address is known.
It is necessary to assign a password if the device is intended to be accessed by others. Use
this menu to set the user names and passwords of Administrator and up to 9 different users
(User 1 to User 9), and the access right of each user.
User name：Set a user name between 5 and 16 characters.
Password：Set a password between 5 and 16 characters.
Re-type password：Re-type the password to confirm.
Viewer Mode：Set a user to Admin, Operator or Viewer mode.
Viewer authentication：If Off, allows any viewer direct access to Live View without
authentication.