Product specifications

Chapter 4. SYSTEM CONFIGURATION
54
4.4.3 Parameters
IP Address
IP address of the network camera
PortThe TCP/IP port number of the network camera
Channel
The channel number of the network camera. This value may apply if a single video server has
multiple channels.
Unconditional Recording
Check this box, if you wish the NVR to start recording immediately. To configure other types of recording,
you need to perform additional operations after channel creation.
Disable Channel
Temporarily disable the channel. NVR will not access any channel with this box checked. You can always
enable it at later time.
4.5 How to add RTSP camera?
4.5.1 Instructions
Let's assume you have a RTSP video source as follows: rtsp://192.168.0.55/mpeg4
In this example, you need to perform following configuration steps in Camera Setup
 Select RTSPCam as driver
 Enter correct IP address (Port is not related RTSP port)