Product specifications

FSW-2104W Multimedia Residential Gateway

5.4.1 WAN Connection

You can configure the WAN port parameters on this page.

First, please choose the WAN Connection Type (Dynamic IP/Static IP / PPPoE ) to the

Internet. The default type is PPPoE. If you aren’t given any login parameters (fixed IP address, logging ID, etc),

please select Dynamic IP. If you are given a fixed IP (static IP), please select Static IP. If you are given a user

name and a password, please select PPPoE. If you are not sure which connection type you use currently,

please contact your ISP to obtain the correct information.

1. If you choose Dynamic IP, the router will automatically get IP parameters from

your ISP. You can see the page as follows (figure 5-7):

Figure 5-7 WAN - Dynamic IP

This page displays the WAN IP parameters assigned dynamically by your ISP,

including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button in Status menu to renew

the IP parameters from your ISP. Click the Release button to release the IP parameters.

If your ISP gives you one or two DNS addresses, select [DNS List] button in DNS Setup and enter the

primary and secondary addresses into the correct fields. Otherwise, the DNS servers will be assigned

dynamically from ISP.

Note: If you get ‘Address not found' errors when you go to a Web site, it is likely that your DNS servers are

set up improperly. You should contact your ISP to get DNS server addresses.