Product specifications

FSW-2104W Multimedia Residential Gateway

Chapter 5: Configuring the Router

5.1 login

Enter the User name and password correctly and click OK button (shown in figure 5-1). After your successful

There are fourteen main menus are: Status, LAN, WAN, NAT, Firewall, Qos, IGMP, SNMP, SNTP, VLAN

config, Port config, Storm Control, Tool, System Logs. On the right of the web-based utility, there are the

detailed explanations and instructions for the corresponding page. To apply any settings you have altered on the

page, please click the Save button.

Detailed explanations for each web page's key functions are showing below:

User name and

password : admin

Figure 5-1 login

5.2 Status

The Status page displays the router's current status and configuration.

5.2.1 Information

This field displays the system information, including Current Status, Working Time, Network Time, Hardware

Version, Firmware Version and Compile Date.

5.2.1.1 WAN Status

These parameters apply to the WAN port of the router, including Connected Type, Connected Status, IP

Address, Subnet Mask, WAN MAC, Gateway, Primary DNS, and Secondary DNS

If PPPoE is chosen as the WAN connection type, the Disconnect button will be shown here while you are

accessing the Internet. You can also cut the connection by clicking the button. If you have not connected to the

Internet, a Connect button will be shown, you can then establish the connection by clicking the button.