Specifications

Chapter 3 Web Based Management
3.2.7.3 Traffic
The ‘Traffic’ tab will display the RMON traffic counters for each port. The counters show transmitted and
received packet count, transmitted and received byte count as well as error packets, dropped packets and filtered
packets for each port.
3.2.7.4 Port Configuration
The above screen has the port configuration settings for each card’s uplink. The link state is displayed, the
current link speed, the speed can be configure (disable port, enable auto negotiation, or force speed), there is an
option to enable 802.3x flow control, and to adjust the maximum MTU (jumbo frames are supported). There are two
options to deal with excessive collisions, the default is to discard packets, the option is to restart. The final
parameter, “Power Control” is an EcoEthernet™ power saving function. ActiPHY™ is an automatic power savings
mode when a specific port is in link down or standby operation. PerfectReach™ is an intelligent algorithm that
actively determines the needed power level based on cable length.
28