Specifications

Chapter 3 Web Based Management
3.2.6 System
The system settings include informational as well as
configuration setting. Each item will be explained below
briefly.
3.2.6.1 Information
Information about the system is displayed here,
including the hardware version, the MAC address,
firmware versions and software version information.
3.2.6.2 Configuration
System information includes the MIB-2 variables for
contact, name and location of the system.
3.2.6.3 IP Setup
The IP Setup provides the web based method to
change the IP address, subnet mask, default gateway
and the VLAN ID.
3.2.6.4 Date and Time
The Date & Time Setup provides the web based
method to change the system time and configure SNTP
time synchronization. The best method to set time is to
first click the “Synchronize with PC” button. This will load
your PC clock time into the GSW. Next, enter the
Network Time Protocol (NTP) server’s IP address, set
the geographical time zone offset from GMT (UTC) and
enable auto Synchronization. Click “Save” and the click
“Synchronize with Server”.
24