Specifications

Chapter 2 Provisioning

From the System Status and Configuration menu, type ‘2’, System Configuration.

<< System Configuration >>

<1> :System Contact []

<2> :System Name []

<3> :System Location []

<4> :DHCP Client [Disable]

<5> :DHCP Renew [192.168.1.1]

<6> :IP Address [192.168.1.1]

<7> :Subnet Netmask [255.255.255.0]

<8> :Default Gateway IP [192.168.1.254]

<9> :Apply IP Configuration.

<A> :TFTP Server IP [192.168.1.2]

<B> :TFTP File Name [Alone.dat]

These are the default TCP/IP settings.

You can directly connect by web

browser if you have configured your

Ethernet connected PC for this subnet.

<C> :Do TFTP and Update Software.

<T> :Date and Time.

<ESC>:Go to Previous Menu.

The first three items provide the MIB-2 with these contents. If the GSW/SNMP is to get IP address dynamically, then enable

the DHCP Client. For static IP assignment, fill in items 6, 7, and 8. Edit items A & B to provide update for the GSW card.

Item 9 is used to apply the settings made.

Item C starts the update process.

1: Use this key to set the System Contact for the SNMP MIB-2.

2: Use this key to set the System Name for the SNMP MIB-2.

3: Use this key to set the System Location for the SNMP MIB-2.

4: Use this key to enable DHCP Client for dynamic TCP/IP

5: Use this key to set the

6: Use this key to set the IP address of the GSW.

7: Use this key to set the Subnet Mask of the GSW.

8: Use this key to set the default gateway address for the GSW.

9: This key will apply the IP settings to the GSW.

A: Use this key to set the IP address of the TFTP server, used for upgrading.

B: Use this key to set the update image filename to be transferred by TFTP.

C: This key will initiate the TFTP image transfer and flash upgrade the File System.

T: This key will bring up the network time setting menu.

ESC: This key will write any changes and leave the system setting menu.

NOTE: If changing the IP address, subnet mask or default gateway, applying the settings, i.e., by selection

<9> : Apply IP Configuration, will take place immediately. You will lose contact until revising the manager PC IP

settings to match the new TCP/IP setup.