User manual

ManualsBrandsCTC Union ManualsNetworkingFRM220

1

2

3

4

5

6

7

8

9

1.6 Panel

1 x SFP port, supports any

155M or 1.25G transceiver

Fixed

GbE Optical

Transceiver

Power LAN Lnk

The LAN Speed and FX Speed LEDs

use dual color to indicate speed.

FX Link

Green indicates Fast Ethernet (100M).

Yellow indicates Gigabit Speed.

When off, the LAN Speed LED

Lan Speed

FX Speed

indicates a 10M speed.

LED Indicators

Factory reset procedure

Apply power to 1000M(S).

Allow 30 seconds to fully boot.

DEFAULT:

Use to recover from lost password or to return

all settings to factory default values.

Using a pencil or ball-point pen, press the

'DEFAULT' recessed push-button switch (located

on the face plate) and hold for 6 seconds. The unit

will be restored to factory default almost

immediately. The defaults are:

Figure 1. Panel Graphics

IP=10.1.1.1

netmask=255.255.255.0

GW=10.1.1.254

password reset to 'admin'

10