Specifications

Appendix A
66
A.5.1 Functional Details
Ethernet
The 1000EAS is based on a L2 switch chip which supports non-blocking switching fabric with up to 1024 MAC
lookup filtering table and support for Egress tagging/untagging selectable per port in any combination using 802.1Q
VLAN support for 4094 VIDs and BPDU handling for spanning tree protocol. There are also 28 32bit and 2 64 bit
RMON counters per port that can be displayed through the management system or received via SNMP standard
MIB statistics.
The 10/100/1000Base RJ-45 connectors are located on the front panel of the card along with two SFP cages
for industry standard 1.25Gbps SFP modules. All UTP connections are designed for auto MDI-X operation,
requiring only a straight connection to any device. A unique feature of the FRM220-1000EAS switch/converter is
the use of a common PCB card which may either be used as a standalone converter (FRM220-CH01 series) or
placed in the FRM220-CH20 rack.
Management
The FRM220-1000EAS has its own embedded processor which can be used to configure the device for stand-
alone operation. When placed in a stand-alone chassis, this device supports a text based Telnet terminal with an
easy to use menu system for configuration. The embedded HTTP server provides an easy to use GUI (Graphical
User Interface) with any web browser. SNMP is also supported in the stand-alone operation. When using network
management software and our proprietary MIB file specifically for the 1000EAS, all settings can be performed,
performance monitoring realized and alarm traps received. When placed in a managed chassis, such as our
FRM220-CH20 with NMC (Network Management Controller) card, the 1000EAS card is configured and monitored
through the chassis NMC via console, Telnet, Web HTTP or SNMP.
1. Stand-alone – IP settings allow management by Telnet, Web or SNMP
2. Rack management - When placed in NMC managed rack, all other settings can be overridden by the NMC management.
A.5.2 Panel
Figure A.5.1 Panel designations of FRM220-1000EAS
1000EAS
2 x SFP ports, support any
1.25G transceiver
LED Indicators
Power
1, 2 Link
Test
Yellow:
1000M
Green:
100M
Off:
10M
On: Link
Flash:
Activity
Off:
no link
1
2
3
4
DEFAULT:
Use to recover lost password or to
return TCP/IP settings to factory
default values.