Specifications

Appendix A
64
A.4.4 Panel
Figure A.4.1 Panel designations of FRM220-100AS-2
A.4.5 Installation of SFP Modules
CTC Union supplied SFP modules are of the Bale Clasp type. The bale clasp pluggable module has a bale
clasp that secures the module into the SFP cage.
Inserting a Bale Clasp SFP Module into the Cage
Step 1 Close the bale clasp upward before inserting the pluggable module.
Step 2 Line up the SFP module with the port, and slide it into the cage.
Removing a Bale Clasp SFP Module
Step 1 Open the bale clasp on the SFP module. Press the clasp downward with your index finger.
Step 2 Grasp the SFP module between your thumb and index finger and carefully remove it from the SFP cage.
Figure A.4.2 Bale Clasp type SFP with bale open
A.4.6 Provisioning
Because of the complex settings of 10/100AS and because there exists a stand-alone user manual for the 10/100AS, this NMC
user manual will not go into the detailed settings here.
Please refer to the FRM220-10/100AS User Manual.
10/100AS-2
2 x SFP ports, support any
155M transceiver
LED Indicators
Green
Power
Green
1, 2 Link
Red
Test
Amber
On:100M
Off:10M
Green
On: Link
Flash:
Activity
Off:
no link
1
2
3
4
DEFAULT: (recessed pushbutton)
Use to recover lost password or to
return all settings to factory default
values.