Specifications

Chapter 2 Provisioning
23
2.2.9.4 Setup the FRM220
The following screens will show the detailed procedures to setup the networking for the FRM220 and prepare
for TFTP upgrade of the SNMP.
Once the console port is connected to a terminal, the following screen will display.
****************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220 NMC VER. 3.16 ***
****************************************
This Chassis ID:[00] Cascade:[Yes] Monitored Chassis ID:[00]
Chassis List:
#0:[X] #1:[ ] #2:[ ] #3:[ ] #4:[ ] #5:[ ] #6:[ ] #7:[ ] #8:[ ] #9:[ ]
<1>:SLOT #01 > NMC & Chassis <B>:SLOT #11 > FRM220-10/100I
<2>:SLOT #02 > FRM220-10/100I <C>:SLOT #12 > FRM220-10/100I
<3>:SLOT #03 > FRM220-10/100I <D>:SLOT #13 > FRM220-10/100I
<4>:SLOT #04 > FRM220-10/100I <E>:SLOT #14 > FRM220-10/100I
<5>:SLOT #05 > FRM220-10/100I <F>:SLOT #15 > FRM220-10/100I
<6>:SLOT #06 > FRM220-10/100I <G>:SLOT #16 > FRM220-10/100I
<7>:SLOT #07 > FRM220-10/100I <H>:SLOT #17 > FRM220-10/100I
<8>:SLOT #08 > FRM220-10/100I <I>:SLOT #18 > Empty
<9>:SLOT #09 > FRM220-10/100I <J>:SLOT #19 > Empty
<A>:SLOT #10 > FRM220-10/100I <K>:SLOT #20 > Empty
<->:Monitor previous chassis <+>:Monitor next chassis
<L>:SNMP System Configuration Setup
<M>:SNMP Manager Configuration Setup
<P>:Password Setup
<R>:Reboot <Z>:Logout
Press 'L' to enter the System Configuration Setup.
****************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220 NMC VER. 3.16 ***
****************************************
<< SNMP System Configuration Setup >>
Model= FRM220
S/N= 123456789
Target MAC Address= 00:02:ab:06:20:20
<1>: Target IP= 192.168.1.1
<2>: Target Netmask= 255.255.255.0
<3>: Target Gateway= 192.168.1.254
<4>: Target Name= FRM220
<5>: TFTP Server IP= 192.168.1.100
<6>: TFTP Download Kernel= linux.zip
<7>: TFTP Download File System= romfs.zip
<8>: Load default settings and write to system.
<9>: Do TFTP and Flash Kernel function.
<A>: Do TFTP and Flash File System function.
<ESC>: Write to system and go to previous menu.
Please select an item.
Using the menu items 1,2,3 & 5, keyin the networking values. If your laptop will run the TFTP daemon, set its
IP in the configuration for item 5, "TFTP Server IP".
If you have made any changes to items 1-5, you must write (ESC) and reboot (R) the NMC. Press 'ESC' to
store the results and at the main menu press 'R' and confirm with 'y'. The NMC will reboot completely in about 20 ~
30 seconds.
The kernel and filesystem are in compressed format. We previously used the 'zip' file extension, but to avoid
confusion we now use the 'gz' file extension so that users will not mistakenly unzip the images.
The version format is imbedded in the compressed gz file's name. This will make it easier to identify different
versions. For example:
kernel12314.gz would refer to kernel with build #12314
romfs316.gz is a file system image for version 3.16
Kernel versions will change less often, while file system versions will change more often.
These are the default TCP/IP settings.
You can directly connect by Telnet or
web browser if you have configured
your Ethernet connected PC for this
subnet.