Specifications

Chapter 2 Provisioning
17
Step Two: Manager Configuration Process
a.) Assign Managers Press the 'M' key
<< SNMP Manager Configuration Setup of Chassis 0 >>
Manager's IP Community String Access
=================== ================ ==========
#1 --- --- ---
#2 --- --- ---
#3 --- --- ---
#4 --- --- ---
#5 --- --- ---
#6 --- --- ---
#7 --- --- ---
#8 --- --- ---
Command Function Key:
<1>~<8>: Edit manager #1 to #8 setting.
<D> : Delete all settings.
<N> : Go to Trap Configuration menu.
<X> : Go to Syslog Configuration menu.
<S> : Confirm above setting and restart SNMP.
<ESC> : Back to main menu without modification.
Please select an item.
1-8: Use these keys to set the IP address, IP address range or disable for up to 8 SNMP management
destinations.
D: Use this key to delete all of the management settings.
N: Use this key to go to the Trap manager configuration menu.
X: Use this key to go to the Syslog server setting menu.
S: Use this key to confirm the settings, save and restart the SNMP daemon.
ESC: Use the escape key to exit this menu without doing any changes.
****************************************
*** CTC UNION TECHNOLOGIES CO., LTD. ***
*** FRM220 NMC VER. 1.95 ***
****************************************
<< SNMP Manager Configuration Setup >>
Manager's IP Community String Access
=================== ================ ==========
#1 192.168.1.0/24 private read-write
#2 default public read-only
#3 172.24.1.125 private read-write
#4 --- --- ---
#5 --- --- ---
#6 --- --- ---
#7 --- --- ---
#8 --- --- ---
Command Function Key:
<1>~<8>: Edit manager #1 to #8 setting.
<D> : Delete all settings.
<N> : Go to Trap Configuration menu.
<X> : Go to Syslog Configuration menu.
<S> : Confirm above setting and restart SNMP.
<ESC> : Back to main menu without modification.
Please select an item.
Please note the following when setting the Manager's IP:
1. Using the word 'default' will allow any IP address to manage the rack. They will be assigned the access authority per the
assigned access string, read-write or read-only.
2. When using the subnet delimiter (/8 /16 /24, etc.) the entire sub-net can be allowed management rights.
3. When assigning only a single IP address for management, there is no need to use the /xx subnet.
All managers on this
subnet have read/write
access, with community
string 'private'
This single manager has
read/write access, with
community string 'private'
These eight locations can be used to
setup a single or large number of
authorized managers.