Specifications

Appendix A
160
A.27 FRM220A-FSW301 Managed 1-Fiber + 3-UTP Fast Ethernet Switch Card
FRM220A-FSW103 is a three port copper to single port fiber Fast Ethernet solution designed to make
conversion between 10/100Base-TX and 100Base-FX with SFP. With SNMP and Web-based management in
FRM220-NMC or FRM220A-GSW/SNMP, the network administrator can monitor, configure and control the activity
of each card from a centrally located managed rack controlling all converter settings including duplex and speed
configuration. This media converter is completely transparent to Layer 2 and Layer 3 protocols including IEEE
802.1q, VLAN tag, Q in Q, STP, IPX, IP, etc.
Features
• 3 Port 10/100BASE-TX and 1 Port 100BASE-FX Converter.
• Auto-Cross over for MDI/MDIX at UTP port.
• Auto-Negotiation or Manual forced mode for UTP port.
• Supports flow control (802.3X).
• Forward 1552 bytes (max MTU). (VLAN tag transparent)
• Supports LED indicators : Power / FX-Link, TX1-Link/TX1-Speed, TX2-Link/TX2-Speed, TX3-Link/TX3-Speed.
• Supported by FRM220 or FRM220A (for Ethernet Aggregation) managed chassis systems.
• Supports the local management (Monitor or Configure status) by the SNMP manager when placed in managed system.
• Supports DOM function for SFP fiber transceiver.
• Supports Auto Laser Shutdown (ALS) function.
• Provides product information for management.
• Supports On-Line F/W upgrade (local) by the SNMP manager when placed in managed system.
Management Features
When placed in a stand-alone chassis with console port, these devices support a text based serial terminal with
an easy to use menu system for configuration. When placed in a managed chassis, the card is configured and
monitored through the chassis NMC (network management controller) via console, Telnet, Web HTTP or SNMP.
Specifications
Standard
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, l00BASE-FX
Supports Full Duplex Ethernet mode
Supports Ethernet Packet up to 1552KBytes in size.
10/100BASE-TX RJ-45 Connectors
FRM220A-FSW103 : Three RJ45 connectors and one SFP cage are provided
Auto MDI-X allows all UTP connections to be made using only a common straight-through UTP cable.
Optical Specifications
100Base-FX Connector
FRM220A-FSW103 : One SFP with LC connector can be provided for optic cable connection.
Power
Adapter: 12VDC, Built-in AC Power 100-240V, Built-in DC Power 18-72V Consumption <4W
Environment
Operating -- 0°C ~ 80°C, Storage -- -10°C ~ 80°C, Humidity -- 10 ~95% (non-condensing)
Weight
FRM220-FSW103-DC12: 400g FRM220-FSW103-AC: 750g
FRM220-FSW103-DC48: 750g FRM220-FSW103-AD/AA/DD: 800g
Dimensions (W x D x H) mm
FRM220- FSW103-DC12: 88 x 160 x 24 FRM220- FSW103-AC: 135 x 201 x 35
FRM220- FSW103-DC48: 135 x 201 x 35 FRM220- FSW103-AD: 135 x 201 x 35
FRM220- FSW103-AD/AA/DD : 135 x 201 x 35
Certifications
CE (EMI/LVD), FCC Class A, RoHS compliant
WARNING: Fiber optic equipment may emit laser or infrared light that can injure your eyes. Never look into an optical
fiber or connector port. Always assume that fiber optic cables are connected to a laser light source.