Specifications

Appendix A
135
A.14.3 Provisioning by DIP (Stand-alone)
There is one DIP Switch installed on the PCBA of the 10G-SS
Dip
Sw
1 2 3 4 5 6 7 8
Rate
1
Rate
2
Rate
3
Rate
4
Line
LFP
Line
ALS
Client
LFP
Client
ALS
Protocol Supported Fiber Data Rate
Off Off Off Off 10G Ethernet 10.3125Gbps
On
Off Off Off 10G Fiber Channel 10.51875Gbps
Off
On
Off Off OC-192/STM-64 9.95328Gbps
10G
On On
Off Off G.709 OTU2 10.709225Gbps
Sw5 Line LFP – On enables the line side Link Fault Pass-thru function
Sw6 Line ALS – On enables the line side Auto Laser Shutdown function
Sw7 Client LFP – On enables the client side Link Fault Pass-thru function
Sw8 Client ALS – On enables the client side Auto Laser Shutdown function
Notice: All of these settings are ignored if the card is placed in the FRM220-CH20 with NMC/SNMP
management or in the CH02M with local console. The card will follow the settings done via the chassis
management. (Refer to NMC operation manual for details on managing all cards.)