Specifications

Appendix A
115
A.11.4 Provisioning by NMC (Telnet)
When placed in the CH20 with NMC, this card can be configured through any of the NMC interfaces, including Telnet, Web
GUI and SNMP.
<1> : Port Active - Use this item to enable or disable the line card. When disabled all transmission will be blocked and all
the line card LED indicators will be Off.
<2> : Line Side Loop Back - This initiates the line side (top fiber connector) towards the connected fiber equipment.
<3> : Client Side Loop Back - This initiates the client side (bottom fiber connector) towards the connected fiber equipment.
<4> : Link Fault Pass Through - This enables or disables the LFP function of the converter.
<5> : Auto Laser Shutdown (ALS) - Enables or disables the ALS safety feature for the Optical port.
<6> : Port Reset - This function will clear and reload the CPLD, effectively resetting the port. Data loss will occur when
performing this reset. Use with care.
<7> : Set to Default - This action will return the Serial card to factory default settings.
<D> : Go to Line Card Status menu - If an SFP is installed for optical, the information can be viewed here. See next page..
Line Card Status
This Chassis ID:[00] Cascaded:[Yes] Monitored Chassis ID:[00]
SLOT #10 > FRM220-155MS [Local ] [ Ver:1.000-1.030-1.010-0.000 ]
<1> : Port Active:[Enable ]
Line Side Link:[Down] Client Side Link:[Down]
<2> : Line Side Loopback:[Off]
<3> : Client Side Loopback:[Off]
<4> : Link Fault Pass Through(LFP):[Disable]
<5> : Auto Laser Shutdown(ALS) :[Disable]
<6> : Port Reset.
<7> : Set to Default.
Line Side Small Form Pluggable(SFP) :[Yes]
Line Digital Diagnostic(D/D) :[Yes]
Client Side Small Form Pluggable(SFP):[Yes]
Client Digital Diagnostic(D/D) :[No ]
<D> : Go to the SFP and D/D Functions menu.
SLOT #10 > FRM220-155MS [Local ] [ Ver:1.000-1.030-1.010-0.000 ]
LINE Side CLIENT Side
Vendor Name :[ FIBERXON INC. ] [ CTC UNION ]
Vendor Part Number:[ FTM-3125C-L40 ] [ SFS-5030-L31(I) ]
Fiber Type :[ Single ] [ Single ]
Wave Length :[ 1310nm ] [ 1310nm ]
Wave Length 2 :[ ----nm ] [ ----nm ]
Link Length :[ 40km ] [ 30km ]
Tx Power :[ +01dBm ]
Rx Power :[ -04dBm ]
Rx Sensitivity :[ ------ ]
Temperature :[ +045C ]
Power Margin :[ ------ ]
Power Loss :[ 00 dB ]