Specifications

Appendix A
104
A.9.7 Firmware Upgrade
1. From the "System" menu click the "Upgrade Line Card" button.
2. Select the card type radio button, which in this case is the FRM220-Serial
3. Select the slot to update. Selecting "All Slots" will upgrade all local and remote Serial cards. (this may take up to 15
minutes)
4. If selecting an individual slot, you must also select either the local or remote unit.
5. The image file name needs to be keyed in. The TFTP server should be able to find this file and the "System" settings need to
be correct (see Chapter 2, settings).
6. Click the "Upgrade" button to start the update.