Specifications

Appendix A
103
A.9.6 Provisioning by NMC (Web)
The settings, described in the Telnet operation, are easily manipulated here in the Web GUI. From the top, the
Fiber port, DATA port, Function buttons and SFP information (if any) at the bottom.
After making any changes, be sure to click the “Set Parameters” button.
1. Port Active: Setting this to ‘Disable’ will halt all traffic through the card. In the remote in-band unit, this
option is not allowed.
2. ALS: Auto Laser Shutdown is a safety measure. If a transceiver losses optical signal at its receive port, it
will turn off the transmitting laser.
3. Serial Port Mode: The interface can be selected from RS-422 (4-wire, Tx and Rx pair), RS-485 (2-wire Half
Duplex), RS-232 3-wire (TD, RD and SG) or RS-232 5-wire (TD, RD, SG plus handshaking In & Out).