User manual

Chapter 3. Operation

If a password is required to login, please enter the 4 digit password previously set. Please see

3.5.2.1 System Configuration regarding setting and clearing the password.

This is the main "LOCAL" root menu that will be displayed after login.

LOCAL *******************************************

**** CTC UNION TECHNOLOGIES CO.,LTD ****

**** FMUX04 CONSOLE MODE Ver 1.00 ****

**** <http://www.ctcu.com> ****

*******************************************

0. Logout

1. Display System Status

2. Configure System Status

3. Display Alarm Record

4. Device Information

Please select the item 0~4

3.5.1 Display System Status

From the main root menu, select "1" to display the real-time status of the FMUX04.

LOCAL << Display System Status >> 2006/02/16 16:03:06

+--------------------+-------------------+-------------------+

|Optical | [LOCAL] | [REMOTE] |

+--------------------+-------------------+-------------------+

|Loss of Signal | | |

|Loopback Status | | |

|Far End Fault (FEF) |ENABLED |ENABLED |

|Bit Error Rate Alarm|BER = 0 |BER = 0 |

+--------------------+-------------------+-------------------+

|Channels |CH1 CH2 CH3 CH4 |CH1 CH2 CH3 CH4 |

+--------------------+-------------------+-------------------+

|Service Status |ON ON ON ON |ON ON ON ON |

|Loss of Signal | | |

|BPV status | | |

|Loopback Status | | |

|Line Code |HDB3 HDB3 HDB3 HDB3|HDB3 HDB3 HDB3 HDB3|

|Termination Type |[ E1/120/RJ45 ]|[ E1/120/RJ45 ]|

+--------------------+-------------------+-------------------+

|Alarm Relay |ENABLED / Alarm OFF|ENABLED / Alarm OFF|

+--------------------+-------------------+-------------------+

|Phone Status |ENABLED |DISABLED |

+--------------------+-------------------+-------------------+

Press <ESC> to previous menu.