User manual

Chapter 4. Operation
40 Version 1.2 Apr 2006
For example to modify the Code Violation threshold, press "1".
LOCAL <<< Define Alarm Threshold >>>
1. CV (Code Violation) [ 255 ]
2. ES (Error Seconds) [ 300 Sec. ]
3. SES (Severely Error Seconds)[ 300 Sec. ]
4. UAS (Unavailable Seconds) [ 300 Sec. ]
============================================================
<<< CV Threshold >>>
1. 255 bits
2. 2048 bits
3. 65535 bits
Please select the item or <ESC> to previous menu.
Select one of the available settings or press <ESC> to exit.
4.5.8 Setting System Date and Time
If we go back again to the Define System menu, we can next select the Date & Time setting
function. Please <ESC> back, then press "8" for item 8.
LOCAL <<< Date and Time >>>
1. Date. [ 2003/10/01 ]
2. Time. [ 03:34:15 ]
Please select the item or <ESC> to previous menu.
To correct the date and time, press "1" for the date or "2" for the time. The cursor will be
placed on the setting for year in Date or for hour in Time.
LOCAL <<< Date and Time >>>
1. Date. [ 2004/03/03 ]
2. Time. [ 14:15:15 ]
Press <+>,<-> Key to set, or Press <ESC> to Exit.
Use the "+" and "-" keys to the correct Date and Time values, then press ENTER. The cursor
will move to the next field, month or minute. Press ENTER after adjusting the parameters. Press
<ESC> when finished.
NOTE: When the factory default settings are loaded, the real time clock will require resetting.
(The setting of the SNMP agent is covered under a separate chapter. Please refer to the SNMP
operation chapter.)