User manual

Chapter 4. Operation
32 Version 1.2 Apr 2006
4.5 Configuring in Console Mode
The Fiber Multiplexer Control Port (labeled RS-232 CONSOLE on the front panel) is a
console terminal port designed to facilitate setup of all parameters through the use of a standard text
based terminal or any terminal emulation program running on a Personal Computer. Make the
appropriate connections, start the terminal application, apply power to the Fiber Multiplexer, then
press ENTER on the PC keyboard. If you are using "HyperTerminal™" the display should similar
to the following. (the version may be different)
4-3 Terminal Connection