User manual

Chapter 4. Operation
28 Version 1.2 Apr 2006
4.2.1 Top Level Menus The following are the 10 top level Menus. Press the right arrow key to
select another top level Menu or press ENTER to reach that menu's sub menu.

S Y S T E M

C O N F I G
Set the Ext Clock (if the option is installed), Save User Set, Load Defaults, Load User Set,
Modify Password or Logout. Browse sub-menu items with arrow keys and select with Enter.
Browse setting options with arrow keys and set option with Enter.

O P T I C A L

C O N F I G
Set the working modes of Optical 1 and Optical 2 (if installed), the ALS function (Automatic
Laser Shutoff), Loopback or BERT function of either optical port. Browse sub-menu items with
arrow keys and select with Enter. Browse setting options with arrow keys and set option with Enter.

P O R T 1 - E 1 120

C O N F I G
Entering this menu allows configuration of the Port Card installed in the Port 1 slot. For the
E1 card, the "in service state", Line Code and Loop back functions can be set for each of 4
channels. Browse sub-menu items with arrow keys and select with Enter. Browse setting options
with arrow keys and set option with Enter.

P O R T 2 - E 1 75

C O N F I G
Entering this menu allows configuration of the Port Card installed in the Port 2 slot. For the
E1 card, the "in service state", Line Code and Loop back functions can be set for each of 4
channels. Browse sub-menu items with arrow keys and select with Enter. Browse setting options
with arrow keys and set option with Enter.

P O R T 3 - T 1 100

C O N F I G
Entering this menu allows configuration of the Port Card installed in the Port 3 slot. For the
T1 card, the "in service state", Line Code and Loop back functions can be set for each of 4
channels. Browse sub-menu items with arrow keys and select with Enter. Browse setting options
with arrow keys and set option with Enter.

P O R T 4 - L A N

C O N F I G
Entering this menu allows configuration of the Port Card installed in the Port 4 slot. "N/A"
means that no card is installed in Port 4. Browse sub-menu items with arrow keys and select with
Enter. Browse setting options with arrow keys and set option with Enter.