Product specifications

Chapter 5 Operation

5.13 Performance Monitoring

The performance monitoring screen will show the valid quarters (15 minute intervals) and valid days (24

hour intervals) that have been counted for each card (Fiber Aggregate; E1 or T1 type card). Select the card

and access the next screen to see the detail performance data by pressing [F2].

[F6] Reset : to clear all PM counters on the selected monitoring path

[F7] Reset All : to clear all PM counters on the All monitoring paths

Performance monitoring is only supported on E1 or T1 card. The E1S card (unframed) only supports BPV

error but cannot support CRC4 error monitoring (framed mode card is required for that).

System Name: Performance Monitoring

[F3]Site: All [F4]SlotId: All [F5]ChId: All

+-----------------------------------------------------------------------------+

|[F1]St#/Sl#/Ch# ValidQuarter ValidDay Alarm |

|Aggr/Lo 3 0 - |

|E1/Lo/1/1 3 0 - |

|E1/Lo/1/2 3 0 -#|

|E1/Lo/1/3 3 0 -#|

|E1/Lo/1/4 3 0 -#|

|Aggr/Re 1 0 -#|

|E1/Re/1/1 1 0 -#|

|E1/Re/1/2 1 0 -#|

|E1/Re/1/3 1 0 -#|

|E1/Re/1/4 1 0 -#|

| #|

+-----------------------------------------------------------------------------+

| Monitor[F2] Reset[F6] Reset All[F7] Back[ESC] |