Product specifications

Chapter 5 Operation
69
5.7 Data Port Parameter Configuration
On the front panel of the FMUX01A/Plus is an RJ-45 port labeled 'RS-232'. This port is just to the right of
the 'Console' port and provides an asynchronous RS-232 tributary clear channel between the local and
remote multiplexers. The following screen is used to configure the communication parameters.
Use [F3] to select baud rate and toggle the different rates with the "space" bar.
Use [F4] to set the data bit length for the asynchronous data.
Use [F5] to set the parity, use "space" to toggle between Odd, Even, or No parity.
Use [F6] to set the stop bit length. Again, use "space" to toggle through the parameter settings.
Confirm settings by pressing [F2].
System Name: Data Port Configuration
Site : < Local > < Remote >
[F3] Baud Rate : 115200 115200
[F4] Data Bit : 8 8
[F5] Parity : Disable Disable
[F6] Stop Bit : 1 bit 1 bit
+-----------------------------------------------------------------------+
| Confirm[F2] Back[ESC] |
+-----------------------------------------------------------------------+