Product specifications

Chapter 5 Operation
59
5.4.4 FXO/FXS Interface Configuration
If the EOC (Embedded Operations Channel) connection is closed, a symbol "-" will be shown for each Re
(remote) configuration. (for example, if fiber link is down it will effect EOC)
[F2] Edit channel screen is shown below :
The only setting for FXO/FXS tributary is In-Service / Out-Of-Service setting.
System Name: FXO/FXS Interface Parameters Config
[F3]Site: All [F4]SlotId: 3 [F5]ChId: All
+-----------------------------------------------------------------------------+
|[F1]St#/Sl#/Ch# Service Circuit Id |
|Fxo/Lo/3/1 IS |
|Fxo/Lo/3/2 IS |
|Fxo/Lo/3/3 IS #|
|Fxo/Lo/3/4 IS #|
|Fxo/Re/3/1 IS #|
|Fxo/Re/3/2 IS #|
|Fxo/Re/3/3 IS #|
|Fxo/Re/3/4 IS #|
| #|
| #|
| #|
| #|
| #|
+-----------------------------------------------------------------------------+
+-----------------------------------------------------------------------------+
| Edit[F2] Slot Edit[F6] Group IS[F7] Group OOS[F8] Back[ESC] |
+-----------------------------------------------------------------------------+
System Name: FXO/FXS Parameters Ch Editing
Location : Local/Slot 3/Ch 1
[F1] Circuit Identifier : __________________
[F3] Service Mode : IS
+-----------------------------------------------------------------------+
| Confirm[F2] Back[ESC] |
+-----------------------------------------------------------------------+