Product specifications

Chapter 5 Operation

5.4.3 T1 (DS1) Interface Configuration

If the EOC (Embedded Operations Channel) connection is closed, a symbol "-" will be shown for each Re

(remote) configuration. (for example, if fiber link is down it will effect EOC)

[F2] Edit channel screen is shown below :

There are two T1 Line Codings : B8ZS or AMI

There are five LBO (Line Build Out) settings : 0-133ft / 133-266ft / 266-399ft / 399-533ft / 533-655ft .

4xT1 card modules supports unframed, clear channel T1 (DS1) only.

System Name: T1 Interface Parameters Config

[F3]Site: All [F4]SlotId: 2 [F5]ChId: All

+-----------------------------------------------------------------------------+

|[F1]St#/Sl#/Ch# Service Coding Framing T1/LBO Circuit Id |

|T1/Lo/2/1 IS B8ZS Unframed 0-133 ft |

|T1/Lo/2/2 IS B8ZS Unframed 0-133 ft |

|T1/Lo/2/3 IS B8ZS Unframed 0-133 ft #|

|T1/Lo/2/4 IS B8ZS Unframed 0-133 ft #|

|T1/Re/2/1 IS B8ZS Unframed 0-133 ft #|

|T1/Re/2/2 IS B8ZS Unframed 0-133 ft #|

|T1/Re/2/3 IS B8ZS Unframed 0-133 ft #|

|T1/Re/2/4 IS B8ZS Unframed 0-133 ft #|

| #|

+-----------------------------------------------------------------------------+

| Edit[F2] Slot Edit[F6] Group IS[F7] Group OOS[F8] Back[ESC] |

+-----------------------------------------------------------------------------+

System Name: T1 Parameters Channel Editing

Location : Local/Slot 1/Ch 1

[F1] Circuit Identifier : __________________

[F3] Service Mode : IS

[F4] Frame Type : Unframed

[F5] Line Coding : B8ZS

[F6] LBO Setting : 0-133 ft

+-----------------------------------------------------------------------+

| Confirm[F2] Back[ESC] |

+-----------------------------------------------------------------------+