Product specifications

Chapter 5 Operation
56
5.4.2 V.35 Interface Configuration
If the EOC (Embedded Operations Channel) connection is closed, a symbol "-" will be shown for each Re
(remote) configuration. (for example, if fiber link is down it will effect EOC)
[F2] Edit channel screen is shown below :
System Name: V.35 Interface Parameters Config
[F3]Site: All [F4]SlotId: 4 [F5]ChId: All
+-----------------------------------------------------------------------------+
|[F1]St#/Sl#/Ch# Serv ClkSrc Frame/PCM DataRate TxClk RxClk Circuit Id |
|V.35/Lo/4/1 IS Internal Unframed 2048K Normal Normal |
|V.35/Lo/4/2 IS Internal Unframed 2048K Normal Normal |
|V.35/Lo/4/3 IS Internal Unframed 2048K Normal Normal #|
|V.35/Lo/4/4 IS Internal Unframed 2048K Normal Normal #|
|V.35/Re/4/1 IS Internal Unframed 2048K Normal Normal #|
|V.35/Re/4/2 IS Internal Unframed 2048K Normal Normal #|
|V.35/Re/4/3 IS Internal Unframed 2048K Normal Normal #|
|V.35/Re/4/4 IS Internal Unframed 2048K Normal Normal #|
| #|
| #|
| #|
| #|
| #|
+-----------------------------------------------------------------------------+
+-----------------------------------------------------------------------------+
| Edit[F2] Slot Edit[F6] Group IS[F7] Group OOS[F8] Back[ESC] |
+-----------------------------------------------------------------------------+
System Name: V.35 Parameters Ch Editing
Location : Local/Slot 4/Ch 1
[F1] Circuit Identifier : __________________
[F3] Service Mode : IS
[F4] Clock Source : Internal
[F5] Tx Clock : Normal
[F6] Rx Clock : Normal
[F7] Data Rate : 2048K
[F8] Frame Mode : Unframed
+-----------------------------------------------------------------------+
| Confirm[F2] Back[ESC] |
+-----------------------------------------------------------------------+