Product specifications

Chapter 5 Operation
41
5.3.7 Network Time Synchronization
The system provides the ability to synchronize time to time server using standard NTP protocol. Setup the
time server's IP address and set the time zone. Then execute the Start synchronizing command [F5]. The
system clock will be automatically corrected via Network Time Protocol.
When user selects the synchronization command item in local or remote side, and "running status" will show
the following messages :
"Start Synchronizing!"
"Synchronizing!",
"Synchronizing Complete!",
"Synchronizing Error!",
When any error of synchronization occurs, one of the below error messages will shown :
"Internal Error!",
"Information Incomplete!",
"Synchronization is running!",
"Time Get Error!",
"Abort by user!",
"Timeout!",
"No Error"
System Name: Network Time Synchronization
Site: Local
System Clock : 2000_ /1__ /23_ 17_ :36_ :54_
[F1] Clock Server IP Address : 0___ . 0___ . 0___ . 0___
[F3] Time Zone : GMT
[F4] Operation Target : Local
Running Status: Local : Idle
Remote : Idle
+---------------------------------------------------------------------+
| Confirm[F2] Synchronize[F5] Back[ESC] |
+---------------------------------------------------------------------+