Product specifications

Chapter 5 Operation
38
5.3.6 Software Upgrade and Reboot Operation
This function is used to upgrade the local and/or remote unit, or reboot the unit. To run upgrade the user
must first complete the setting of the Software Upgrade Configuration.
When user selects the [F3] Reboot command item in local or remote side, the display will show the
message :
"Start rebooting!",
"Ongoing!",
"Complete, Bye-!",
"None"
System Name: Software Upgrade and Reboot Operation
Site: Local
[F1] Operation Target: Local+Remote
Software Boot Status:
Local: Idle
Remote: Idle
Software Upgrade Status:
Local: Idle!
Remote: Idle!
+----------------------------------------------------------------+
| Upgrade[F2] Reboot[F3] Back[ESC] |
+----------------------------------------------------------------+