Product specifications

Chapter 4 Quick Start
25
4.1.8 Profile Management
The active changes need to be saved if they are to be used during next power up or reboot. Use [ESC] to
return to the Main Menu, select item "1" and press [F2] to go to System Configuration. Select item 'd',
System Profile Management, and press [F2]. The following screen will be displayed.
4.1.8.1 Profile Save Parameter Config
Pressing [F2] from the Profile Management page will bring up the Profile Save Parameter Config page.
Use this page to enable or disable the "auto save" function and the set the "auto save interval". When auto
save is enabled, changes made to the configuration by any means (LCD, Console, Web, etc.) will
automatically be saved to Profile I at the predefined time interval.
The FMUX01A/Plus provides an Auto-Saving function, and auto saving interval.
System Name: Profile Management
Site: Local
[F1]
+-------------------------------------------------------+
|[1] Profile Operation Configuration |
|[2] Profile Operation |
| |
| |
| |
| |
| #|
| #|
| #|
| #|
| #|
| #|
+-------------------------------------------------------+
+-------------------------------------------------------+
| Next[F2] Back[ESC] |
+-------------------------------------------------------+
System Name: Profile Save Parameter Config
Site: Local
[F1] Auto-Saving : OFF
[F3] Profile Auto Saving Interval : 1_____ minutes
+-----------------------------------------------------------------------+
| Confirm[F2] Back[ESC] |
+-----------------------------------------------------------------------+