Product specifications

Chapter 4 Quick Start

The following shows the screen after setting service mode "in service" (IS), setting unframed, line code

B8ZS and LBO (Line Build Out).

Press [F2] to confirm the settings

and exit back to the Equipment Status menu.

Repeat the same for the remote unit.

The following is an example of T1 and E1 channels with alarm. The channels have Red LED alarm. If the

T1 or E1 lines are not connected to the multiplexer, this would be a normal condition, i.e. Signal Loss.

Next we need to configure the tributary in the Remote FMUX01A/Plus.

Press [F1] to toggle to the Remote unit.

System Name: T1 Parameters Slot Editing

Location : Local /Slot 1

All channels will be set as:

[F1] Service Mode : IS

[F3] Frame Type : Unframed

[F4] Line Coding : B8ZS

[F5] LBO Setting : 533-655 ft

+-----------------------------------------------------------------------+

| Confirm[F2] Back[ESC] |

+-----------------------------------------------------------------------+

System Name: Equipment Status Monitoring

+-----------------------------------------------------------------------------+

|<Lo> HwVer: 1.0.3| Optical | TB CH/ETH 1/LINK 2/FDX 3/100M 4/10M |

| MAJ: R PWR: G | [OE1] [OE2] | LAN 1 - - - - |

| MIN: - LCK: - | LSR: Y LSR: Y | LAN 2 - - - - |

| LBK: - RNG: - | LOS: - LOS: - | LAN M - - - - |

| RDI: - ACO: - | WK: G WK: - | TB1/G 4xT1S R R R R |

|----------------------------------| TB2/G 4xFXO - - - - |

| [PWR1]: F [FAN]: - [ExtAlm1]: L | TB3/G4xE1S/B R R R R |

| [PWR2]: - [ExtAlm2]: L | TB4/G4xE1S/B R R R R |

+-----------------------------------------------------------------------------+

|<Re> HwVer: | Optical | TB CH/ETH 1/LINK 2/FDX 3/100M 4/10M |

| MAJ: R PWR: G | [OE1] [OE2] | LAN 1 - - - - |

| MIN: LCK: | LSR: Y LSR: Y | LAN 2 - - - - |

| LBK: RNG: | LOS: LOS: | LAN M - - - - |

| RDI: ACO: | WK: G WK: | TB1/G 4xT1S R R R R |

|----------------------------------| TB2/G 4xFXS - - - - |

| [PWR1]: F [FAN]: [ExtAlm1]: L | TB3/G4xE1S/B R R R R |

| [PWR2]: [ExtAlm2]: L | TB4/G4xE1S/B R R R R |

+-----------------------------------------------------------------------------+

|Lo->Re[F1] TB1 Edit[F2] TB2 Edit[F3] TB3 Edit[F4] TB4 Edit[F5] Back[ESC]|

+-----------------------------------------------------------------------------+