Product specifications

Chapter 2 Installation

This chapter provides the information needed to install the FMUX01A/Plus. It is important to follow the

installation instruction to ensure normal operation of the system and to prevent damages due to human error.

Only trained and qualified personnel should be allowed to install or replace this

equipment.

2.1 Unpacking

If there is a possibility for future relocation of the FMUX01A/Plus system, please save the cartons and

protective packaging materials. The following items are shipped with your FMUX01A/Plus :

One FMUX01A/Plus user's manual (CDROM), AC power cord(s) and DB9-RJ45 console cable.

One (or numerous units of) FMUX01A/Plus chassis system

Please carefully unpack and inspect the unit and accessories for potential damage or missing parts. Contact

your shipper immediately if you suspect any damage during transit. Contact our nearest sales representative

or our company directly if you are missing any parts. Improper handling during shipment may cause early

failure.

2.2 Site Requirements

The FCC (Federal Communications Commission, USA) requires telecommunication equipment to withstand

electrical surge that may result from lighting strikes. This equipment has been tested and found to comply

with those FCC requirements. Users should follow the precautions below to insure safety and minimize the

risk of damage to the equipment or personnel:



Make sure that the power outlet is properly grounded.



Proper grounding should include a minimum of :

A ground rod buried outside the building at least 8 feet (2.44 meters) deep.

2.3 Site Selection

In order to allow easy access to the equipment, leave at least 36 inches (90 cm) clearance in the front and at

least 4 inches (10.2 cm) at the rear.

To avoid overheating, leave at least 1 inch (2.5 cm) on either side of FMUX01A/Plus. Also, do not stack

other equipment on top of FMUX01A/Plus.

2.4 DC Electrical Outlet Connection

For safety and to prevent damage to the FMUX01A/Plus, make sure that the power requirements match

those of your electric outlets. Connect power and ground to the FMUX01A/Plus. Connect all cables before

powering on the equipment.

2.5 Laser Safety

Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to this direct or

indirect radiation.