User manual

Chapter 4 Web UI Management
40
In the 'IP Serial No.:' pull-down, there are 5 LAN IP entries that can be set. The IP binding function enables
you to bind different IP address on the Eth1 interface.
When you change the LAN IP 0 to a different IP, you will need to input the same new IP address in the browser to
continue to access the Web UI interface.
Figure 4-8 LAN Setup
Add the IP address to LAN interface of ET100R router. Please input the proper values into the correct fields.
Ex: LAN IP 1, LAN IP Address:192.168.1.254 Subnet 255.255.255.0. Finish by clicking the 'Apply' button.
Figure 4-9 IP binding