User manual

Chapter 4 Web UI Management

CTC Union's ET100R router provides not only the CLI command interface, either directly connected to

console port or Telnet session from any connected network to access the ET100R management function, but also,

provides a Web UI (User Interface) for accessing the OAM management. This chapter will describe the Web UI

interface and how to configure the ET100R router through the Web UI interface.

Using the Web UI interface provides an easy method to configure the ET100R router. Using any standard web

browser enables you to launch the ET100R management interface without any extra management software installed. It

is an easy and cost-effective way to manage your devices located anywhere.

4.1 Web UI Interface

When using CTC Union Web UI interface for the first time, the factory default IP address setting of the

ET100R Ethernet interface is 192.168.0.1/255.255.255.0 or when you have finished configuring the ET100R LAN IP

setting through terminal console. You can launch the Web UI interface using any Internet browser to access the

ET100R router. Figure 4-1 is an example of Web UI interface window.

Figure 4-1 Web UI interface window