Technical data

68
CTC EcoZenith i250
Installation
CTC EcoZenith i250 3x400 V can be reconnected to a
18 kW immersion heater
.
NB: Installation must be carried out by a qualified electrician.
Connecting
1. Begin by disconnecting the power to the product.
2. Free the three black wires with insulation sleeves from the cabling.
3. Undo the smallest switch (K2 on the electrical diagram) by pulling the
yellow fastening backwards.
14. Connecting –Increased immersion
heater output 15 kW to 18 kW.