Manualshelf

Technical data

ManualsBrandsCTC Union ManualsBoilerEcoZenith i250
21222324252627282930
23 CTC EcoZenith i250
General Information
8. Detail Description Menus
All the settings can be configured directly on screen
using the well-structured control panel. The large icons
operate as buttons on the touch display.
Operational and temperature information is also
displayed here. You can easily enter the different menus
to find information on the operation or to set your own
values.
8.1 Start menu
This menu is the system’s start menu. This provides an
overview of the current operational data.
The system returns to this menu if no buttons are
pressed within 10 minutes. All other menus can be
accessed from this menu. NOTE: Some menus are only
shown if a heat pump is installed.
8.2 Description of icons
Room temp.
Settings for raising or lowering the
temperature indoors and also for scheduling
temperature changes.
DHW
Settings for DHW production.
Operation
This displays current operational data for both
your heating system and heat pump. Historical
operational data is also available.
Installer
This option is used by the installer to configure
the settings and servicing for your heating
system.
1 2
Room temp. Radiator system 1
If radiator system 1 is defined, the current
room temperature is displayed here.
1 2
Room temp. Radiator system 2
If radiator system 2 is defined, the current
room temperature is displayed here.
Tank temperature
This displays the current temperature in the
upper part of the tank.
Outdoor temperature
This displays the current outdoor temperature.
Home
The Home button takes you back to the Start
menu.
Return
The Return button takes you back to the
previous level.
OK
The OK button is used to mark and confirm
text and options in the menus.
Night reduction
This schedules a temperature reduction at
night if selected.
Holiday
You can use this to reduce the room
temperature permanently, e.g. during holidays
when the house is unoccupied.
Weekly program
This is used to reduce the temperature for a
few days, for instance if you commute every
week.
Stored operation data
This displays historical data.
Time/Language
This is used to set the date, time and the
language you want the menu to be displayed
in.
Settings
The settings for operation of EcoZenith and
the system are usually configured by the
installer.
Define system
The heating system’s structure can be
adjusted/modified using this option.
Service
Advanced settings are configured by the
appropriate technical person.
1 2
22,2 ºC 21,2 ºC 58 ºC -5 ºC
1 2
1 2
1 2
1
2
1 2
Room temp. DHW Operation Installer
CTC EcoZenith Monday 09:35